Ramblin Wood manufactures quality platform bed frames and furniture in Albuquerque, New Mexico. Their furniture is manufactured from sustainably-harvested Appalachian red oak, white hard maple or bamboo (cherry and walnut available on a custom basis). They use a non-toxic linseed oil finish that is completely free of VOCs and heavy metal driers.
Shipping starts at about $60 but does vary according to the size of the bed, extra slats and the distance from New Mexico. We will provide you with a shipping quote after you order and will not put the order through until you agree to the shipping charges.
What are some of the options available with your beds ? Our beds are extremelycustomizable. Standard options include: wood: Appalachian red oak, white hard maple, natural (light) bamboo, caramelized (dark) bamboo spacing in the slat base (1/4" or 3" spacing between slats) bed platform height: 12" is standard but you can add 3" or 5" to that or you can subtract 7" from the platform height bed headboard height to accommodate thicker or thinner mattresses and/or box-springs higher footboards finished with pure linseed oil or unfinished extra long beds (queen or cal-king length available with all beds)
In addition to the standard options above, we can create almost any custom length, width or height that you might be looking for with most of our beds.
Do I need a box-spring with your beds ?
No, a box-spring or a foundation is not required with our beds. Our beds are specifically designed in a way that they eliminate the need for a box-spring or mattress foundation. That said, you can use a box-spring with our beds if you choose to do so but be sure that you let us know so that we can raise the headboard up high enough to peek out over your mattress!
The Samba bed by Ramblin Wood has a nice contemporary look. Gentle straight lines and the doweled headboard gives this design a truely clean look. This elegant solid wood platform bed is sure to be a treasured piece of furniture. Available in genuine solid wood American Red Oak and White Hard Maple. Each has an easy to care for Danish oil finish.
Your standard bed is made to accomodate a 6" to 9" thick mattresses. If your mattress exceeds 9" you may need to upgrade into one of the following options below. Please note that the options will adjust the height of your legs. If going into a spot with limited space, please keep this in mind. Dimensions are shown below. Or If you need your bed to have more space underneath or if you need to use a mattress-boxspring combo on your bed frame you can select from those options below. Please note you can only use one of these options at a time per bed.
Options to raise the height of the headboard to accomodate thicker mattresses.
Bed Leg Options:
Mattress Size
Headboard Leg
Slat Height
Option Price
Use w/Drawers
Standard Bed Leg
6 in. to 9 in.
28 in. Height
12 in. floor to top
Standard
Yes
3 in. Bigger Gap
10 in. to 12 in.
31 in. Height
12 in. floor to top
$29 Upgrade
Yes
7 in. Bigger Gap
13 in. to 15 in.
35 in. Height
12 in. floor to top
$39 Upgrade
Yes
10 in. Bigger Gap
16 in. to 19 in.
35 in. Height
9 in. floor to top
$39 Upgrade
No
Options that will raise the platform of the bed higher off the ground.
Bed Leg Options:
Mattress Size
Headboard Leg
Slat Height
Option Price
Use w/Drawers
3 in. Higher Bed
6 in. to 9 in.
31 in. Height
15 in. floor to top
$29 Upgrade
Yes
5 in Higher Bed
6 in. to 9 in.
33 in. height
17 in. floor to top
$59 Upgrade
Yes
Options that will lower the platform of the bed closer to the ground.
Bed Leg Options:
Mattress Size
Headboard Leg
Slat Height
Option Price
Use w/Drawers
4 in. Lower Bed
6 in. to 9 in.
24 in. Height
8 in. floor to top
$59 Upgrade
No
7 in. Lower Bed
6 in. to 9 in.
21 in. Height
5 in. floor to top
$59 Upgrade
No
Option so that you can use a mattress and boxspring on the bed.
Bed Leg Options:
Mattress Size
Headboard Leg
Slat Height
Option Price
Use w/Drawers
Boxspring Upgrade
9 in. and 8 in.
31 in. Height
6 1/2 in. floor to top
$39 Upgrade
No
Option
Description
Higher Footboard
Adds a 7 in. matching footboard that is a lower version of the headboard. A $39 fee.
Extra Long Option
Makes a standard length Twin or Full bed into an XL - 80 in. long bed. A $39 fee.
Foundation:
Ramblin Wood beds consist of a pine slat support system. Each slat is 2 1/2" wide with 3" spacing between each slat. Slats rest on a built-in shelf/ledge designed into the siderails of the bed. Twin, Full and Queen size beds use a center support rail. King and Cal King beds use two center support rails. Height to the top of the slats from the floor is 12".
Pine Slats
Standard slats that are included with each bed.
Poplar Slats
Upgrades from pine to poplar hardwood slats. Price varies by size of bed.
Extra Slats
2 1/2 in. wide slats with 3 in. spaces between each slat is standard for solid pine slats. 2 in. wide slats with 3 in. spaces between each slat is standard for solid poplar slats. Some mattress manufacturers require a solid foundation with no spaces or gaps and choosing the "extra poplar slats option" will meet those requirements in most cases. Price varies by size of bed.
wood: Appalachian red oak, white hard maple, natural (light) bamboo, caramelized (dark) bamboo
